Dh’fhoillsich SHANDONG VS PETROLEUM TECHNOLOGY CO., LTD, solaraiche earbsach de phàirtean a bharrachd dràibhidh àrd-inbhe agus fuasglaidhean iar-mhargaidh, an-diugh an loidhne-loidhne de ghoireasan àrd-choileanaidh agus toraidhean reic teth airson 2024.
Prìomh thachartasan de na prìomh ghoireasan dràibhidh ann an 2024:
| Tuairisgeul | Àireamh Pàirt |
| Quill, Prìne NC50Pinx6.25-3ACME-2G-LH, Toll 2.5" | 830044-1 |
| Gèar, Gèar, Tarbh, Helical, 74T, MK2, Quill, EMI 400 | 1410087 |
| IBOP UACHDARACH, CO-chruinneachadh PH50, 6-5/8 X 6-5/8, Teisteanas C/W | 110103-500 |
| Faclan-cinn airson an neach-gleidhidh №720891 Tescko | 720891 |
| Cruinneachadh Shaft, Eadar-mheadhanach, Cruinneachadh Shaft, Eadar-mheadhanach, Helical, 16T62T, MK2, EMI-400 | 1410088 |
| Pumpa, Hydraulic, CCW, Pumpa Vane 7.93cu-inrev & 3.56cu-inrev | 720690 |
| Seaft fiaclach, cuir a-steach, helical, 23T, MK2, EMI-400 Pinion, Cuir a-steach, Helical, 23T, MK2, EMI-400 | 1410089 |
| Prìomh shailean XT | 1065612 |
| CÀBALL, CO-CHRUINNEACHADH, 42 CONDO. | 122517-200-25-3-B |
| Prìne, Frèam Leudachaidh, 1-1/2"ODx6-1/4"L, Fad Feumail 3-1/2" | 3384 |
| CÀBALL | 128929-135-25-4-B |
| seafta TD275 | 1060119 |
| Faclan-cinn, dà-sheaghach, bàs, 4-1/2"IF, BxB | 720475 |
| ASSY, LWR IBOP, 65/8X65/8W/REL GRV-STD, Teisteanas C/W | 114706-500 |
| ТРУБА S-образной формы №13771 Теско | 13771 |
| Co-chruinneachadh SHAFT DRUM Deiseil | H38-EV1/6838131 |
| Còd 62 motair Rineer 4port | 8641 |
| BODH, CLAMP SOILINDER | 30157221 |
| Prìomh shailean HT | 1044883 |
| Luchdaich a-nuas am faidhle 1.06.15.010 DQ-40LHTY-JQ(250T) | 1.06.15.010 |
| Tagh 1.06.19.048 DQ-40LHTY-JQ(250T) | 1.06.19.048 |
| ADAPTAR CEANGAL ROTHACH | 30173159 |
| cnò | 730784 |
| Co-chruinneachadh seafta Cathead Crìochnaichte | H38-AF1/6838133 |
| CO-DHÙNADH, MANIFOLD, EEXD, TDS-9S/11S | 114175+30 |
| ASSY, IBOP, UACHDARACH, PH-100 | 30173887-500 |
| GIÙL, LEANTAINN CAM | 30158767-04 |
| CÀBALL | 30175017-86-4-3-B |
| GIÙLADH, PRÌOMH THRUST | 30174374 |
| LÌNID, TAOBH, UHMW, 3/4X3-3/8X72, BUISEAN TORCAIDH HMI | 15385 |
| Ceangal rothlach, Co-chruinneachadh inneal-atharrachaidh | 30173277 |
| Glèidheadair, Ìosal, Cnò Luchdaidh, 250-EMI-400/450, HXI | 13094 |
| Pasgan càball, geansaidh | 124977-100 |
| PUMP (MT), BEALADH, BOGSA-GÈAR, ASSY, TDS9S | 117603-1 |
| Co-chruinneachadh amhaich rothlach, 3" OD, co-phàirtean òrd, rèiteachadh Fig602 | 1170020 |
| SOLENOID, BHALB, 3-POS 24 VDC | 127908-J2 |
| Muffta airson an 250-EMI-400250-HXI-700 | 730785 |
| Bìr, Taic, Rolair, Teipichte, 14.5" Ø A-muigh x 7.0" Ø A-staigh x 3.25" Tiugh Bìr, Thrust, Rlr, Tpr, 14.5"ODx7.0"IDx3.25"Thk | 7452 |
| Tunail treòrachaidh pìoba airson stad VP, stàilinn, sgoltadh, airson pìob drile 6-3/4", airson ECI/EMI/EXI/HCI/HXI / Modalan treòrachaidh, Sgoltadh, Pìob Drile 6-3/4", ECI/EMI /EXI/HCI/HXI | 8987 |
| Kran КШЦ (Berхний B Cборе) 1.08.03.013 Hong Hua DQ-40LHTY-JQ(250T) | 1.08.03.013 |
| S-spigot, 250-HMI-475 | 1170021 |
| CALIPER (MT), BREIC DIOSCA | 109528 |
| Slige, Gnìomhadair (PH50) | 110042 |
| pìob hydr | 6030 |
| GÈAR, TARBH, HEILICAL | 30158574 |
| Pasgan càraidh, Ìosal IBOP STD & NAM | 99498-2 |
| Pìob-nighe, toll 3", 7,500 PSI | 30123289 |
| MANIFOLD, TDS – 9 (INNEALANACHADH) ÀIREAMH DRWG: 121341, CO-chruinneachadh ADAPTAR CEANGAIL ROTHACH, 500 TUNN | 109547-2 |
| MANIFOLD, SUAS, MACH, TDS10 | 120641-2 |
| Thoir sùil air B Cборе 1.03.01.021 DQ-40LHTY-JQ(250T) | 1.03.01.021 |
| Pasgan càraidh, IBOP àrd, PH-50 àbhaisteach agus NAM | 114859 |
| Grooving Seelve Dùthaich Tùsail: Sìona STUTHAN: Q345B AIRSON H38-EV1/6838131 | 06-038-684 |
| ASSY, MANIFOLD, EEX, TEÒTHACHD ÌOSAL FAIC TEACSA SLC | 114175-LT |
| FÀINNE, GLYD, 10.0 DIAM-ROD | 118375 |
| Brùthadh giùlain 500 tunna Tds11 | P611002413 |
| Thoir sùil air B Cборе CBП 1.06.17.001 / 1.06.17.011 Hong Hua DQ-40LHTY-JQ(250) | 1.06.17.011 |
| Pàtran an t-seòmair-beò | 30151875 |
| 045 - Gèar, Pinion, 21T, Co-mheas 2.19:1, Bogsa-gèara, HMI * Ann an Stoc* | 3769 |
| Pasgan càball cumhachd a tha a’ tighinn a-steach | 125274-100 |
| PRÌOMH SHAFT | 121131 |
| CAM, LEANTAINN 6" | 30155438 |
| CRANK, CRÙNADH | 30158189 |
| Còmhdach Pìob Nighe Snìomhach Drile, stàilinn leaghte, innealaichte, 250-HMIS-475 | 14372 |
| BHALBHA SOLENOID, D03, UL (A’ TOIRT ÀITE 89771-10-U24) | 127908-D2 |
| CUING, GNÌOMHAICHE IBOP PH75 | 30157225 |
| Meatair Sruthaidh, In-loidhne, Dà-stiùiridh, Lionntan Peatrail, 1-14"FORB, 10-100 GPM, 5000-psi, Stàilinn gun Mheirg | 6208 |
| STIÙIREADH PRÌNE | 88732 |
| CRANK, ASSY, TAOBH A-MUIGH | 98898 |
| ASSY GNÌOMHAICHE, CO-CHÒRDADH | 110703 |
| Brùthadh suidse TDS-3 EEX | 76841 |
| GNÌOMHAICHE, SLAIT DHÙBAILT, RÒIN BILEAN, PH | 120557-501 |
| Suidheachadh, Frèam Leudachaidh, Innealaichte, 250-EMI-400250 -HXI-700 | 820114 |
| Dàibhidh davleniy Kish | 83095 |
| iomadachd | M854000326-2 |
| Làmhan, Tasglann TDS9S 5 galan | 110191-501 |
| 189 - Siolandair, Bogsa-clampaidh, HMI *Ann an stoc* | 3848 |
| PISTON, 10 DIA | 12820 |
| Bolt, Gualainn, DrHd, EMI/EXI/HXI | 481183 |
| Eileamaid sìoltachain ath-chuir, ola, gun seach-rathad, 10-micron, KZ x 10 | 953 |
| Prìne Rothlach, airson SVP 250 HMI / Prìne, Cuing, Ceangal Rothlach, 250 HMI | 8377 |
| Gidravlichevskiy motair | P614000093 |
| Bacadh inslithe TESCO 12-24 VDC, 720446 | 720446 |
| Co-chruinneachadh siolandair uisgeachaidh greimeadair, airson modail HMI GP (Leabhar-làimhe 16499) | 16499 |
| GIÙRADH (MT), ROLAIR, TEAPAIR, 200X310MM | 109519 |
| Pasgan, càradh, obrachail (coileanta) | 30177550-2 |
| TDS9S ACCUM, HYDRO-PNEU 6", CE | 110562-1CE |
| Pasgan plumaireachd uisgeachaidh, TDS-11SA | 121403 |
| 012 - Co-chruinneachadh Pìoban-nighe, 200T/250T, HMI/T100 **1 Seachdain Lìbhrigeadh** | 8021 |
| PLÀTA, MULLACH, CNÒ, LUCHD, 250-HMIS-475 | 8225 |
| Tiùb Leudachaidh Port, Siolandair Grabber | 3060 |
| Pasgan, Cruinneachadh Tiùba | 30171993 |
| Pasgan, Criathrag, Ola-gèar (Criathrag agus O-fhàinne) | 30111013-PASAGAN |
| Pumpa gèar uisgeachaidh, pumpa tandem | P614000091 |
| COLAIR, CO-DHÙNADH, TUIR | 114895 |
| Muinchill, Uachdarach, Siaft Eadar-mheadhanach, Bogsa Gèar, EMI-400 | 1410141 |
| GNÌOMHAICHE, HYDRAIL, 3.25DIAX10.3ST | 119416 |
| PUMP (MT), BEALADH, BOGSA-GÈAR, ASSY, TDS9S | 117603 |
| Dàta положения elektronный М614004945 | M614004945 |
| Earball-mùid, co-chruinneachadh, 42-stiùiriche | 122718-01-20 |
| Крышка торца рабочей части гидроцилиндра захвата, стальная (EMI 400), 3059 / Cap, Tilleadh | 3059 |
| GIÙRADH (MT), ROLAIR, SIOLANDACH, 200X360MM | 109521 |
| GIÙRADH (MT), ROLAIR, SIOLANDACH, 75X160MM | 109522 |
| Thoir sùil air an t-seòmar-suidhe №M614003825-ACM-001 Varco TDS10SH | M614003825-ASM-001 |
| CO-THEANGADH EARBALL-MHÙIDH - 18 COND, 19 CONN PRÌNE | 124459-01-20 |
| Còdair | 122725 |
| ASSY, PÌOB-NIGHIDH, TOLL 3", 7500 PSI | 30123290 |
| Hydraulic HOUSE, 100R2-AT#12x75-fit FJICxFJIC (#5317) | 5317 |
| BHALB, SOLENOID, ATOS TEÒTHACHD ÌOSAL | 30175915-X2-BT |
| BHALB, SOLENOID, ATOS TEÒTHACHD ÌOSAL | 30175915-J2-BT |
| PUMP, PISTEAN | 109542 |
| BHALB, SMACHD, SRUTH | 98402-800D |
| Pasgan Ròin Aghaidh, Cruinneachadh Pìob-nighe | 30182002-500 |
| Pumpa TDS9S, Vane Uidhreachail | 107783-5C11R |
| Taghadh de DQ019.22.06 / 1200481442 Hong Hua DQ500Z | DQ019.22.06 |
| TDS9S ACCUM, HYDRO-NEU 4" | 110563-1 |
| Modh PC104-DPIO DRL-DPM-BKF | PC104-DPIO DRL-DPM-BKF |
| Corda, Pgtl, Fireann, Braitearan "T", EMI 400, #16, 12Pr, 3m | 730874 |
| pasgan co-chruinneachaidh pìoba | M611002426-500 |
| Manifold solenoid Àir. 590205 Tesco | 590205 |
| Encoder, Optaigeach, 5VDC, 1024 cuislean-atharrachaidh, Toll 1", 10 Prìne, Teòthachd Àrd, ATEX Seòrsa 1 | 970284 |
| Samhain 50003960-11 Assy Latch Valve Bx Elevator | 50003960-11 |
| CEANGAIL, CUMHACHD, QD, SOCAID/IN-LOIDHNE, GEAL | 114869-SL-GEAL |
| GNÌOMHAICHEAR, CO-DHÙNADH | 30119592 |
| PRÌNE, URRAS, 4.25DIAX10.15, MS00009 | 109506 |
| 197 - Pasgan, Pìoban, Uidheamachadh, HMI **Lìbhrigeadh 1 Seachdain** | 16710 |
| SUIDSE, 30" Hg-20 PSI (EExd) | 87541-1 |
| GIÙRAM, ROLAIR, SIOLANDACH, 10.23X18.9X3. | 91252 |
| Pumpa, Tuthill, dà motair | 1410402 |
| BHALB, STIÙIREADH 4W/3P, PT | 16270 |
| Хомут шлицевой КШЦ №11315 Теско | 11315 |
| MFLD ASY, ro-làimh VLVE** (M854000259 A’ cur an àite 111712) | 111712 |
| Muinchill, Pinion, Bogsa Gèar, EMI-400 | 1410401 |
| Bhalbha, Ball | 5105 |
| Giùlan | 6539 |
| PUMP, BEALADH, RHPORT AGUS IUCHAIR, TUTHILL | 12972 |
| ASSY, FILTER, 60-MICRON, OLA | 30111013 |
| Giùlan | 686 |
| PUMP, CUAIRT-DHILLEADH CAOCHLAIDH | P611004347 |
| BHALB, SOLENOID, ATOS TEÒTHACHD ÌOSAL | 30175915-D2-BT |
| 170 - Fàinne, Teanndadh, Draibheadh Gèar Quill, Bogsa Gèar, HMI **6 Lìbhrigeadh na Seachdain** | 17660-1 |
| GIALAN, 5-5.75", NC38/NC40 | 122176 |
| Còn, Giùlan, Rèididh, Rlr, Tpr, 6.5000 "IDx1.8750" W | 8830 |
| CEANGAIL, CUMHACHD, QD, PRÌNE/IN-LOIDHNE, DUBH | 114869-PL-BLK |
| CEANGAIL, CUMHACHD, QD, PRÌNE/IN-LOIDHNE, GEAL | 114869-PL-WHT |
| Siolandair Hiodrálaigeach, Aon Ìre, Trast-thomhas 3", Slat 1.25", Stròc 8", Hiodrálaigeach, Aon Ìre, Toll 3", Slat 1.25", Stròc 8 | 7177-1 |
| ENCODER, DIDSEATACH | 115299 |
| Kran КШЦ (нижний B Cборе) 1.08.04.008 Hong Hua DQ-40LHTY-JQ(250T) | 1.08.04.008 |
| Thoir sùil air U-obразное 2.4.99.03.014 DQ-40LHTY-JQ(250T) | 2.4.99.03.014 |
| lamhnan | P614000115 |
| Pasgan Ròin | 109528-2 |
| Bhalbha, Stiùireadh 3F, P Dubh, A&B - Tanca | 16268 |
| MS1, MS-COMB, Dìon Cus Luchdaidh, Tòisichear, coil 120VAC, 10HP@575V, 9-12,5FLA | 0000-9657-48 |
| Bhalbha, Smachd, 14" NPT, cw Ath-shruthadh Saor-sgrùdadh | 22 |
| Cuir a-steach тормозной CиCтемы DOZ08LNBR71 DQ-40LHTY-JQ(250T) | DOZ08LNBR71 |
| Gabhail TDS9S, Cumhachd Dearg | 110022-1R |
| Gabhail TDS9S, Cumhachd Geal | 110022-1W |
| COILEAR, TUIR | 30124872 |
| 099 - Corda, Pgtl, Fireann, Robotics "A", #14,37C, 3.1m, Pìle, HMI/HC I/HXI *Ann an stoc* | 12948 |
| Plàta, Neach-gleidhidh, airson Greimeadair 7-3/8" & 8-1/2" | 3054 |
| Cairt bhalbhaichean PDM, eadar-dhealachadh UNLDG | 107028-1ANB |
| FO-SHÀBHALAIDH, 7-5/8 X 6-5/8FH | 91785 |
| Gèar, helical, pinion | 117939 |
| BUIS, SLEIBH, SGAOILTE, 1.25X10.0 DIAMANT | 119358 |
| Ròn, 11.5"Shaft x 12.75"OD x 0.6252"W | 5002236 |
| Motair, Hydraulic, 5.4 cu-in | 731073 |
| BHALBHA, SOLENOID AONAR EEXD 24VDC | 112554-D2 |
| GIL, NC50, CO-chruinneachadh, PH100 | 30125052 |
| Crochadh Earraich Twist HXIEXI, Teann, 2.0"Ø OD x 3.5"L, Earrach Neart Àrd a Bharrachd, Die, 2.0"ODx3.5"Lg, Dleastanas Trom a Bharrachd | 730752 |
| Meud 6,25"-7,5" | 125158 |
| Pasgan, sìoltachan, ola gèar (sìoltachan agus fàinne-O) | 30111013-1 |
| BRAITHEADAIR TEÒTHACHD XP, RTD, 100 OHM, 12 MNPT TESCO 5021397 PCS 1 | 5021397 |
| PIN, URRAS | 91060-500 |
| ADAPTAR, TIÙB-S | 109523 |
| VALVE, RELIEF, 100-250 PSI, VENTATMOSPHERE | 16245 |
| 039 - Bearradh, Radial, RLR, SPH, Dbl, 130mmODx60mmIDx46mm Lìbhrigeadh 1 seachdain | 16629 |
| 186 - Geimhle, Earrach, Uachdar, Casan Greimiche, HMI *Ann an Stoc* | 6922 |
| 083 - Adapter, Spline, Pump Drive, D2P/D6P *Ann an stoc* | 2622 |
| STABILISEAR, AGHAIDH (ph100) | 30124898 |
| SEAL KIT: 5IN HYDRO PNEUMATIC ACCUM | 16653908-002 |
| FÀINNE, LABAIRINT | 98931 |
| PRÌNE, LÙIDS, SOILSEIR GLÙM, GEATA | 30178847 |
| Smeòrach, VDC, TDS9S | 116551 |
| Bearradh, Radial, Rlr, Sorcóir, 110mm-ODx50mm-IDx27mm-W | 682 |
| PUMP, GÈAR TAOBH A-MUIGH, TDS-10SA | P614000121 |
| Cnap siolandair cothromachaidh | 12951 |
| PASGAN; COITCHEANN; LANYARD (PLUG AMHAILE GÒISE); MULLACH | 10799241-002 |
| Suidse, Brùthadh, CE, Sòn 1, SPDT, 200-1750 PSI | 730723 |
| FÀINNE, GLASADH, A-STAIGH | 99177 |
| 234 - Pumpa, Uidheamach, CW, 0.24cu-in/rev, HPI, Seafta Spln **Lìbhrigeadh 1 Seachdain** | 2695 |
| Sreath CVR Bhalbhaichean TDS-9S 1 | 99838-1 |
| Siafta, Draibh Heics, Ceumichte, Bhalbha Gnìomh 78" x 58", Gnìomhadair, Mudsave | 7825 |
| Cairt bhalbhaichean lughdachadh TDS9S, dearg/rel | 99353-1AN |
| Siolandair, 4", Cothromachadh-aghaidh | 110687 |
| PAD CAITHEAMH | 124669-5 |
| SLEIBH, PRÌOMH-SHAFT, TDS11 | 110040-1 |
| SLEIBH, RÒIN UACHDARACH, CUAIRT 250T | 14370 |
| Ròn, 7.500"Shaft x 8.750"OD x 0.500"W, HDW1 | 4680 |
| Bhalbha, faochadh, .750NPT. | 30113165 |
| Bogsa Clamp Port Leudachaidh | 16552 |
| 1CH4-16-140G | |
| CEANGAL FILLTE 1 | 30170445 |
| CEANN SIOLINDER | 11075 |
| Muinchill, Ròn Ìochdarach, Cuairteachadh Tesco 250T | 14371 |
| CUING, IBOP, GNÌOMHAICHE | 117853 |
| PÌOB, NIGH, TOLL 4" | 30123438 |
| STUD, PS-16, PRÌNE TREÒRAICH | 86818 |
| CEANGAL FILLTE 2 | 30170446 |
| PRÌNE: URCHAIR 1.48 X 6.48 MS59 | 30173958-LT |
| Клапан ручной реBERCиBный MRV4-16-D0-00 / 1300016692 DQ500Z | 1300016692 |
| Cridhe na Pìoba-nighe, Cuairteachadh 200T, RSTL, Cuairteachadh 200T, HMI / Pìob-nighe, RSTL, Cuairteachadh 200T, HMI | 5889 |
| CEANGAIL, QD, PRÌNE, LOIDHNE | 114729-PL-676-18 |
| Corda, Pgtl, Fireann, Càball Talmhainn, EMI 400,40,1C,3M | 730877 |
| Манифольд, система противовеса, (EMI 400), 8027 / Manifold, CounterBalance | 8027 |
| Pasgan, Pìoban, Hydraulic, Swivel, EMI/HMI **Lìbhrigeadh 1-2 Seachdain** | 16711 |
| Bìaradh, Rolair, Gnìomhadair, Bhalbha Sàbhalaidh-eabar | 5002005 |
| RÒIN, SGUILEADAIR, 11.0DIA-ROD | 119547 |
| Pacadh, Pìob-nighe | 8721 |
| GREASE, GE-MTR (SHELL/TExxon) | 56005-1 |
| TARP, PÌOB | 6618 |
| LEANTAINN CAM | 71847 |
| RÒIN, BILL 8.25x9.5x.62 | 77039 |
| Pìob, Co-chruinneachadh, C'BAL, TDS9S | 59143P290086 |
| BUIS FLANGE, PRÌNE LOSGAIDH, PH-100 | 30151961 |
| Càball, SHPBD MLTCR IEC92-3 | 56625-1.5-03 |
| Bhalbha, Seachadadh, 85psi, 100F° | 1410412 |
| MANIFOLD, ASSY, CLAMP, SOILINDER | 118511 |
| SPÀSAIR, ÌOSAL, PÌOB-NIGH 3", TDS | 30123287 |
| Càball (MT), SHPBD MLTCR IEC92-3 | 56625-1.5-07 |
| Criathrag, Co-chruinneachadh | 82747 |
| gidроаккамулятор системы противовеса TDS-10SA | 110563-11 |
| PACADH, PÌOB-NIGHIDH, 3" "FAIC AN TEACSA" | 123292-2 |
| Siolandair, atharraichte, HMI Link Tilt | 6027 |
| Piramid, Tong, Die (Seòrsa "C" Rotary-Tong) | 16401-2 |
| BHALB, STIÙIREADH 4W/3P, PT, | 16267 |
| U-BOLT, .75DIA, MS21 | 119139 |
| PACAID SHIM, TAIGH-SGEUL, RÒIN UACHDARACH, CUAIRT 250T | 14375 |
| GIÙRADH, ROLAIR, SIOLANDACH, 5.12X7.87 | 88600 |
| Dàta перепада давления, Зона 1, однополюсный na два направления (SPDT), 1.4-5.5 дюймов WC | 1771 |
| Siolandair uisgeach, aon ìre, trast-thomhas 2.5", slat 1.25", stròc 24 | 926 |
| SLEIBH, PRÌNE LOSGAIDH, PH-100 | 30151951 |
| Thoir sùil air B Cборе CBП 1.06.17.001 / 1.06.17.011 Hong Hua DQ-40LHTY-JQ(250) | 1.06.17.001 |
| CRÌOCHDACH, HYD (P/N: 30173216 A’ TOIRT ÀITE 114416) | 30173216 |
| Pasgan Ròin, Mol, Seata 3-phìosan, (Airson Gnìomhadair 3086-TDA-Ser) | 1710029 |
| Criathrag 5772 | 5772 |
| Iomlaidear Teas | 30122104 |
| GÈAR, CO-THEANGACHAIDH 40 X 25 (INNEALANACH) | 30156250 |
| Meud (NC31) 1.03.09.030 Hong Hua DQ-40LHTY-JQ(250T) | 1.03.09.030 |
| Meud (NC46-51) 1.03.09.033 Hong Hua DQ-40LHTY-JQ(250T) | 1.03.09.033 |
| Cairt Bhalbhaichean TDS9S, Dearg/REL | 109858-1AN |
| Dìonadair, Pìob, Rubair, 4-1/2"X6-3/4", TDS-11, Varco 92426 | 92426 |
| Càball Exane 4 stiùiriche 2.5 mm ceàrnagach le staoin | 56625-2.5-04 |
| FEIGHINN, SAE-4 | 93024-4SAE |
| RING, GLYD, 11.5 DIA-ROD(S48130-340A-29) | 30119143 |
| PASGAN, SGRÙDADH BRUIDEAM | 940315-1000 |
| Cruinneadair, 1PT, 3000-psi, #12FORB | 1100093 |
| CO-THIONNADH TIÙBA (TRAST..250) | 30172006 |
| Pasgan càraidh, ròn IBOP, PH50 | 114859-1 |
| GÈAR, PINION, PRÌNE LOSGAIDH, PH-100 | 30156256 |
| SPÀSAIR, ENCODER, TDS9 | 122956 |
| Tòiseadair motair, gnìomhachadh làimhe, coileanadh àbhaisteach, 2.2 kW, 6.3A, 3 ìrean | 770790 |
| BOлт крепления сухаря трубного зажима (Varco) | 30122112 |
| Pasgan Ròin FLR Cruinneachaidh ID 4" le LITR | 87605-2 |
| Thoir sùil air Y-Obraзное airson 110x95x12 2.4.99.03.004 DQ-40LHTY-JQ(250T) | 2.4.99.03.004 |
| CEANGAIL, CUMHACHD, QD, PRÌNE/IN-LOIDHNE, DEARG | 114869-PL-DEARG |
| BOLT, SEAS-DHÌTH | M614004316 |
| BRAIC, SUIDHEADH, TIÙB-S | 117061 |
| GIÙRADH (MT), ROLAIR, SPÈIREACH, 80X170 | 117987 |
| 029 - Buiseag, Gèar-cuibhle, Àite Rèididh, Bogsa-gèara, HMI **Lìbhrigeadh 4-5 seachdainean** | 7962 |
| SPASAIR, ÌOSAL, PACADH, PÌOB-NIGHIDH, ROSTEL, 200T SWVL, HMI | 9300 |
(Air sgàth cuingealachaidhean cunntadh fhaclan, chan eil ach pàirt den t-susbaint air a shealltainn.)
Carson a tha luchd-obrachaidh a’ taghadh goireasan VSP:
✅ Teisteanas càileachd: API, saothrachadh a rèir ISO 9001/1401.
✅ Ri fhaotainn stoc: 1000 meatair ceàrnagach de thaigh-bathair
✅ Neach-dèanamh: Factaraidh stòr, factaraidh OEM
✅ Taic theicnigeach: sgioba innleadairean proifeasanta
✅ Prìs farpaiseach: dearbhte leis a’ mhargaidh
✅ Dearbhadh càileachd: dèan cinnteach gu bheil an draibhear as àirde agad ag obair gu h-èifeachdach
✅ Eòlach: An solaraiche pàirtean dràibhidh as fheàrr agad aon-stad
Àm puist: 14 Gearran 2025